Melola Discovery

← Melola Discovery

Jurnal

PERENCANAAN POROS MESIN PEMISAH KULIT DAN BIJI KACANG HIJAU

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 3 No. 4 (2018)

DOI
10.55679/enthalpy.v3i4.5317
ISSN
2502-8944
Published
2018-12-28
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

This research aims to determine the shaft planning that is safe and good, the moment of twisting or torque, the diameter of the shaft. In this study designed using Autodesk Inventor 2017. Software The material used toplan the shaft is carbon steel for the construction of the machine and rod steel which is cold machined for the shaft with the symbol S55C with a tensile strength of 66 kg/mm2.The results of shaft planning calculationsshow that the power plan is 7.165 kw, moment of torsion or torque with shaft rotation n1 (3600 rpm) of 1,938,530 kg. mm, and for shaft rotation n2 (960 rpm) of 7,269.4489 kg.mm, and the shear stress allowed is5.5 (kg/mm2), and the shaft diameter obtained a value of 28 mm, while the shear stress obtained a value of 1.688 kg/mm2. From the results above it can be seen that the value of shear stress that occurs is smaller than the shear stress value of the permit (􀄲 􀄲􀄮) where 􀄲􀄮 = 5.5 kg/mm and the value of 􀄲 = 1.688 kg/mm2, so that it can be concluded that the size The planned shaft is safe enough.Keywords: Shaft design, safe and good shaft, torque or torque moment, shaft diameter.

Collaboration network of the authors

40 authors · 244 co-authorship links · 3 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Aminur AminurUniversitas Halu Oleo16
Prinob AksarUniversitas Halu Oleo15
Lukas Kano MangallaUniversitas Halu Oleo14
Abd KadirUniversitas Halu Oleo14
Yuspian GunawanAffiliation unknown13
Al Ichlas ImranAffiliation unknown10
Salimin SaliminAffiliation unknown9
La HasanudinUniversitas Halu Oleo9
Kadir KadirAffiliation unknown8
Ridway BalakaAffiliation unknown8
Sudarsono SudarsonoAffiliation unknown8
La HasanuddinAffiliation unknown5
Muhammad HasbiUniversitas Syiah Kuala5
Raden Rinova SisworoUniversitas Halu Oleo4
La Ode Ahmad BarataAffiliation unknown4
Nanang EndriatnoAffiliation unknown4
Jaka Seru Dwi SaputraAffiliation unknown4
R BalakaAffiliation unknown2
Agustinus LolokAffiliation unknown2
SITTI ROSYIDAHAffiliation unknown1
Muhammad Zakaria UmarAffiliation unknown1
Muhammad ArsyadUniversitas Halu Oleo1
Mazhfia UmarAffiliation unknown1
Nasrul NasrulUniversitas Halu Oleo1
LA KARIMUNAUniversitas Halu Oleo1
La Ode MagribiAffiliation unknown1
Luther PagillingAffiliation unknown1
La Ode Amrul HasanAffiliation unknown1
Budiman SadiaAffiliation unknown1
Nanang EndriantoAffiliation unknown1
Asad SyahdanAffiliation unknown1
Sartirlan AliAffiliation unknown1
Raden Rinova SisworoAffiliation unknown1
P AksarAffiliation unknown1
C YusnidarsyahAffiliation unknown1
Asar AsarAffiliation unknown1
Esparuling EsparulingAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 1 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">PERENCANAAN POROS MESIN PEMISAH KULIT DAN BIJI KACANG HIJAU</dc:title>
	<dc:creator>Andri, Muh.</dc:creator>
	<dc:creator>Sudia, Budiman</dc:creator>
	<dc:creator>Samhuddin, Samhuddin</dc:creator>
	<dc:description xml:lang="en-US">This research aims to determine the shaft planning that is safe and good, the moment of twisting or torque, the diameter of the shaft. In this study designed using Autodesk Inventor 2017. Software The material used toplan the shaft is carbon steel for the construction of the machine and rod steel which is cold machined for the shaft with the symbol S55C with a tensile strength of 66 kg/mm2.The results of shaft planning calculationsshow that the power plan is 7.165 kw, moment of torsion or torque with shaft rotation n1 (3600 rpm) of 1,938,530 kg. mm, and for shaft rotation n2 (960 rpm) of 7,269.4489 kg.mm, and the shear stress allowed is5.5 (kg/mm2), and the shaft diameter obtained a value of 28 mm, while the shear stress obtained a value of 1.688 kg/mm2. From the results above it can be seen that the value of shear stress that occurs is smaller than the shear stress value of the permit (􀄲  􀄲􀄮) where 􀄲􀄮 = 5.5 kg/mm and the value of 􀄲 = 1.688 kg/mm2, so that it can be concluded that the size The planned shaft is safe enough.Keywords: Shaft design, safe and good shaft, torque or torque moment, shaft diameter.</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-12-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/5317</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v3i4.5317</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 3, No 4 (2018): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v3i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/5317/3959</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 ENTHALPY</dc:rights>
</oai_dc:dc>