Melola Discovery

← Melola Discovery

Jurnal

DESAIN MESIN PEMARUT KELAPA DAN UBI KAYU DENGAN KOMBINASI ROL PARUT

Dinamika : Jurnal Ilmiah Teknik Mesin · Vol. 10 No. 2 (2019) · pp. 15–20

DOI
10.33772/djitm.v10i2.6932
ISSN
2502-3373, 2085-8817
Published
2019-05-22
Publisher
Jurusan Teknik Mesin, Universitas Halu Oleo
Language
eng

Abstract

This study aims to determine the safe shaft and to design a model of cassava and coconut grated machines. In this study, the grated machine was designed using Autodesk Inventor 2017. The material used for the shaft is carbon steel (S45C) with a tensile strength of 58 kg/mm2. The shaft calculation results show that the plan power is 4.0425 KW, torsional moment or torque at shaft speed 2670 rpm is 5124,955 kg.mm, and permissible shear stress is 4.83 (kg/mm2), and shaft diameter is 21 mm, while the shear stress is obtained at 2.823 kg/mm2. From the above results, it can be seen that the shear stress value that occurs is smaller than the permissible shear stress value (tta) where ta = 5,5 kg/mm and the value t = 2.823 kg/mm2, so it can be concluded that the shaft size planned safe. in this study, the design of the grated machine uses two different grated rollers for cassava and coconut. The pulp used is 4 pieces and grated rollers can be moved simultaneously or just one grated roller.

Keywords

Collaboration network of the authors

40 authors · 206 co-authorship links · 3 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Institut Agama Islam Negeri Kendari
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Abd KadirUniversitas Halu Oleo10
Ridway BalakaAffiliation unknown9
Aminur AminurUniversitas Halu Oleo9
Sudarsono SudarsonoAffiliation unknown8
Al Ichlas ImranAffiliation unknown8
Salimin SaliminAffiliation unknown8
Samhuddin SamhuddinAffiliation unknown7
Yuspian GunawanAffiliation unknown7
Muhammad SudiaAffiliation unknown6
Salim SalimUniversitas Halu Oleo6
La MasiAffiliation unknown5
Mustamin AnggoUniversitas Halu Oleo5
La HasanudinUniversitas Halu Oleo5
Budiman SudiaAffiliation unknown5
Muhammad HasbiUniversitas Syiah Kuala5
Fahinu FahinuAffiliation unknown4
Agustinus LolokAffiliation unknown4
Prinob AksarUniversitas Halu Oleo4
La ArapuAffiliation unknown3
Rahmad PrajonoAffiliation unknown3
Edi CahyonoUniversitas Halu Oleo3
La HasanuddinAffiliation unknown3
Anwar BeyAffiliation unknown3
La Ode Ahmad BarataAffiliation unknown3
Suhar SuharAffiliation unknown2
Jafar JafarAffiliation unknown2
Kodirun KodirunUniversitas Halu Oleo2
La Ode Ahmad JazuliAffiliation unknown2
Mohamad SalamAffiliation unknown2
Ruslan RuslanAffiliation unknown2
Lukas Kano MangallaUniversitas Halu Oleo2
La NdiaUniversitas Halu Oleo2
Saleh SalehAffiliation unknown2
Raden Rinova SisworoUniversitas Halu Oleo2
Safari LaAffiliation unknown1
Manat RahimAffiliation unknown1
La Ode SuriadiAffiliation unknown1
Amanda La HadiInstitut Agama Islam Negeri Kendari1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/dinamika/oai, first harvested 31 Okt 2026, last seen 31 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">DESAIN MESIN PEMARUT KELAPA DAN UBI KAYU DENGAN KOMBINASI ROL PARUT</dc:title>
	<dc:creator>Endriatno, Nanang</dc:creator>
	<dc:creator>Kadir, Kadir</dc:creator>
	<dc:subject xml:lang="en-US"></dc:subject>
	<dc:subject xml:lang="en-US">Grated Machine, Coconut, Cassava, Design, Shaft</dc:subject>
	<dc:description xml:lang="en-US">This study aims to determine the safe shaft and to design a model of cassava and coconut grated machines. In this study, the grated machine was designed using Autodesk Inventor 2017. The material used for the shaft is carbon steel (S45C) with a tensile strength of 58 kg/mm2. The shaft calculation results show that the plan power is 4.0425 KW, torsional moment or torque at shaft speed 2670 rpm is 5124,955 kg.mm, and permissible shear stress is 4.83 (kg/mm2), and shaft diameter is 21 mm, while the shear stress is obtained at 2.823 kg/mm2. From the above results, it can be seen that the shear stress value that occurs is smaller than the permissible shear stress value (tta) where ta = 5,5 kg/mm and the value t = 2.823 kg/mm2, so it can be concluded that the shaft size planned safe. in this study, the design of the grated machine uses two different grated rollers for cassava and coconut. The pulp used is 4 pieces and grated rollers can be moved simultaneously or just one grated roller.</dc:description>
	<dc:publisher xml:lang="en-US">Jurusan Teknik Mesin, Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2019-05-22</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/dinamika/article/view/6932</dc:identifier>
	<dc:identifier>10.33772/djitm.v10i2.6932</dc:identifier>
	<dc:source xml:lang="en-US">Dinamika : Jurnal Ilmiah Teknik Mesin; Vol 10, No 2 (2019); 15-20</dc:source>
	<dc:source>2502-3373</dc:source>
	<dc:source>2085-8817</dc:source>
	<dc:source>10.33772/djitm.v10i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/dinamika/article/view/6932/5106</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 DINAMIKA: Jurnal Ilmiah Teknik Mesin</dc:rights>
</oai_dc:dc>