Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

Simulasi Sudut Serang Aliran Air Terhadap Kincir Air Aliran Bawah

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 4 No. 4 (2019)

DOI
10.55679/enthalpy.v4i4.10161
ISSN
2502-8944
Terbit
2019-12-31
Penerbit
Teknik Mesin Universitas Halu Oleo
Bahasa
eng

Abstrak

Waterwheels become one of the solutions to increase the need for power supplies especially in areas that are not able to reach electrical networks that have sufficient water resources. The research aims to determine the influence of change into the dyeing of the blade and slope of the blade angle to the power and efficiency of the lower flow waterwheel. The manufactured waterwheel model is an undershot type of 16-piece blade. The outer diameter of the Ferris wheel is 0.2 m and the diameter is 0.12 m. Blade is flat in size (0, 04x0,04) m. The Ferris wheel is made up of as many as 3 pieces with a tilt difference of the blade angle of 00 from the shaft, 100 of the shaft, and 200 of the shaft. The results showed that on immersion blade 0.01 m obtained power 0.16 Watt and efficiency 12.24%, in blade dyeing 0.02 m obtained power 0.162 Watt and efficiency 12.42 %, and dyeing 0.03 m obtained power 0.176 Watt and efficiency 13.45 %. While at the slope of a blade angle is obtained by 0.16 Watt power and efficiency 12.24 %, on the slope of blade angle of 100 acquired power 0.302 Watt and efficiency 23.1 %, and at the slope of a blade angle, 200 acquired power 0.447 Watt and efficiency 34.18 %. So it can be said that the more in the immersion blade the greater the power and efficiency of the Ferris wheel, and the more oblique blade angle than the greater the power and efficiency of the windmill.Keywords: Waterwheel, blade, angle, power, and efficiency

Jaringan kolaborasi para penulis

40 penulis · 211 tautan kepenulisan bersama · 5 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Halu Oleo
  • Poltekkes Kemenkes Palu
  • Universitas Gadjah Mada
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Kadir KadirUniversitas Halu Oleo8
Prinob AksarUniversitas Halu Oleo5
Lukas Kano MangallaUniversitas Halu Oleo5
Agustinus LolokAfiliasi tidak diketahui5
Aminur AminurAfiliasi tidak diketahui5
Samhuddin SamhuddinUniversitas Halu Oleo4
Budiman SudiaUniversitas Halu Oleo4
Samhuddin SamhuddinAfiliasi tidak diketahui4
La HasanuddinAfiliasi tidak diketahui3
Salimin SaliminAfiliasi tidak diketahui3
Aminur AminurUniversitas Halu Oleo3
Yuspian GunawanUniversitas Halu Oleo3
Al Ichlas ImranUniversitas Halu Oleo3
Agustinus LolokUniversitas Halu Oleo3
Al Ichlas ImranAfiliasi tidak diketahui3
Aminur AminurUniversitas Halu Oleo2
Yuspian GunawanAfiliasi tidak diketahui2
Ridway BalakaUniversitas Halu Oleo2
Salimin SaliminUniversitas Halu Oleo2
Budiman SudiaAfiliasi tidak diketahui2
Aldiyanto AldiyantoAfiliasi tidak diketahui1
Adib SatonoUniversitas Halu Oleo1
Kadek Edy SusantoUniversitas Halu Oleo1
Wandi HaryansaUniversitas Halu Oleo1
Rival Kahfi GamaUniversitas Halu Oleo1
Mirna PratiwiwahyuniAfiliasi tidak diketahui1
Laode SafiuddinAfiliasi tidak diketahui1
La Ode MagribiAfiliasi tidak diketahui1
Nasrul NasrulPoltekkes Kemenkes Palu1
La KarimunaAfiliasi tidak diketahui1
Abd KadirAfiliasi tidak diketahui1
La Ode Amrul HasanAfiliasi tidak diketahui1
Abd KadirAfiliasi tidak diketahui1
Sudarsono SudarsonoUniversitas Gadjah Mada1
Budiman SadiaAfiliasi tidak diketahui1
Nanang EndriantoAfiliasi tidak diketahui1
Kadir KadirUniversitas Halu Oleo1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, pertama di-harvest 1 Nov 2026, terakhir terlihat 15 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Simulasi Sudut Serang Aliran Air Terhadap Kincir Air Aliran Bawah</dc:title>
	<dc:creator>Sauf, Muhamad</dc:creator>
	<dc:creator>Balaka, Ridway</dc:creator>
	<dc:creator>Hasanudin, La</dc:creator>
	<dc:description xml:lang="en-US">Waterwheels become one of the solutions to increase the need for power supplies especially in areas that are not able to reach electrical networks that have sufficient water resources. The research aims to determine the influence of change into the dyeing of the blade and slope of the blade angle to the power and efficiency of the lower flow waterwheel. The manufactured waterwheel model is an undershot type of 16-piece blade. The outer diameter of the Ferris wheel is 0.2 m and the diameter is 0.12 m. Blade is flat in size (0, 04x0,04) m. The Ferris wheel is made up of as many as 3 pieces with a tilt difference of the blade angle of 00 from the shaft, 100 of the shaft, and 200 of the shaft. The results showed that on immersion blade 0.01 m obtained power 0.16 Watt and efficiency 12.24%, in blade dyeing 0.02 m obtained power 0.162 Watt and efficiency 12.42 %, and dyeing 0.03 m obtained power 0.176 Watt and efficiency 13.45 %. While at the slope of a blade angle is obtained by 0.16 Watt power and efficiency 12.24 %, on the slope of blade angle of 100 acquired power 0.302 Watt and efficiency 23.1 %, and at the slope of a blade angle, 200 acquired power 0.447 Watt and efficiency 34.18 %. So it can be said that the more in the immersion blade the greater the power and efficiency of the Ferris wheel, and the more oblique blade angle than the greater the power and efficiency of the windmill.Keywords: Waterwheel, blade, angle, power, and efficiency</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2019-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/10161</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v4i4.10161</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 4, No 4 (2019): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v4i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/10161/7249</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 ENTHALPY</dc:rights>
</oai_dc:dc>