Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

BOILER ASH REINFORCED HDPE/NATURAL RUBBER COMPOSITES FOR OTEC COLD WATER PIPES

Jurnal Ilmiah Ilmu Terapan Universitas Jambi · Vol. 10 No. 5 (2026) · hlm. 2708–2723

DOI
10.22437/jiituj.v10i5.53779
ISSN
2580-2259, 2580-2240
Terbit
2026-10-31
Penerbit
LPPM Universitas Jambi
Bahasa
en
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

The development of lightweight materials for Ocean Thermal Energy Conversion (OTEC) cold-water pipes requires an appropriate balance of mechanical strength and flexibility. This study investigated the mechanical properties of high-density polyethylene (HDPE) composites containing natural rubber (NR), polypropylene-graft-maleic anhydride (PP-g-MA), and palm oil boiler ash (POBA) to identify a promising formulation for further development. The composites were processed using a single-screw extruder at 60 rpm and subsequently fabricated by compression molding. We tested five specimens per composition for tensile properties and characterized fracture morphology and thermal behavior using scanning electron microscopy and thermogravimetric analysis, respectively. The HDPE/NR/PP-g-MA/POBA20 formulation exhibited the highest reported tensile strength and elastic modulus, reaching 18.93 MPa and 292.94 MPa, respectively, with an elongation at break of 101.5%. At higher filler loading, tensile strength decreased, potentially due to filler agglomeration, weak interfacial adhesion, and microvoid formation. These findings demonstrate that filler content influences the balance between strength, stiffness, and ductility. This study's novelty lies in evaluating boiler ash–filled polymer composites as potential materials for OTEC infrastructure. The results provide a basis for industrial waste valorization and further composite development. However, hydrostatic pressure testing, compressive evaluation, and long-term seawater durability studies are necessary before practical application can be established.

Kata kunci

Jaringan kolaborasi para penulis

22 penulis · 66 tautan kepenulisan bersama · 27 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Sumatera Utara
  • Universitas Muhammadiyah Sumatera Utara
  • State University of Medan
  • Universitas Islam Negeri Ar-Raniry
  • Indonesian Institute of Sciences
  • Sumatera Institute of Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Himsar AmbaritaUniversitas Sumatera Utara3
Tulus Burhanuddin SitorusUniversitas Sumatera Utara2
Janter Pangaduan SimanjuntakState University of Medan2
Enzo W.B SiahaanUniversitas Sumatera Utara2
Ilmi AbdullahUniversitas Sumatera Utara2
Khairun NisahUniversitas Islam Negeri Ar-Raniry1
Ilmi IlmiUniversitas Sumatera Utara1
Rimbawati RimbawatiUniversitas Muhammadiyah Sumatera Utara1
Farel Hasiholan NapitupuluUniversitas Sumatera Utara1
Andianto PintoroUniversitas Sumatera Utara1
Tulus Burhanuudin SitorusAfiliasi tidak diketahui1
Tuty Dwi Sriaty MatondangAfiliasi tidak diketahui1
Darwin Yunus NasutionAfiliasi tidak diketahui1
Vivi PurwandariUniversitas Sumatera Utara1
I Putu MahendraSumatera Institute of Technology1
Saharman GeaUniversitas Sumatera Utara1
Agus HaryonoIndonesian Institute of Sciences1
Yasir Arafat HutapeaUniversitas Sumatera Utara1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://online-journal.unja.ac.id/index.php/JIITUJ/oai, pertama di-harvest 5 Nov 2026, terakhir terlihat 15 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">BOILER ASH REINFORCED HDPE/NATURAL RUBBER COMPOSITES FOR OTEC COLD WATER PIPES</dc:title>
	<dc:creator xml:lang="en">Pane, Rafsanzani</dc:creator>
	<dc:creator xml:lang="en">Lubis, Sudirman</dc:creator>
	<dc:creator xml:lang="en">Wirjosentono, Basuki</dc:creator>
	<dc:creator xml:lang="en">Nur, Taufiq Bin</dc:creator>
	<dc:subject xml:lang="en">HDPE-Based Composites</dc:subject>
	<dc:subject xml:lang="en">Boiler Ash Filler</dc:subject>
	<dc:subject xml:lang="en">Ocean Thermal Energy Conversion (OTEC)</dc:subject>
	<dc:subject xml:lang="en">Polymer Blend Composites</dc:subject>
	<dc:subject xml:lang="en">Finite Element Simulation</dc:subject>
	<dc:description xml:lang="en">The development of lightweight materials for Ocean Thermal Energy Conversion (OTEC) cold-water pipes requires an appropriate balance of mechanical strength and flexibility. This study investigated the mechanical properties of high-density polyethylene (HDPE) composites containing natural rubber (NR), polypropylene-graft-maleic anhydride (PP-g-MA), and palm oil boiler ash (POBA) to identify a promising formulation for further development. The composites were processed using a single-screw extruder at 60 rpm and subsequently fabricated by compression molding. We tested five specimens per composition for tensile properties and characterized fracture morphology and thermal behavior using scanning electron microscopy and thermogravimetric analysis, respectively. The HDPE/NR/PP-g-MA/POBA20 formulation exhibited the highest reported tensile strength and elastic modulus, reaching 18.93 MPa and 292.94 MPa, respectively, with an elongation at break of 101.5%. At higher filler loading, tensile strength decreased, potentially due to filler agglomeration, weak interfacial adhesion, and microvoid formation. These findings demonstrate that filler content influences the balance between strength, stiffness, and ductility. This study's novelty lies in evaluating boiler ash–filled polymer composites as potential materials for OTEC infrastructure. The results provide a basis for industrial waste valorization and further composite development. However, hydrostatic pressure testing, compressive evaluation, and long-term seawater durability studies are necessary before practical application can be established.</dc:description>
	<dc:publisher xml:lang="en">LPPM Universitas Jambi</dc:publisher>
	<dc:date>2026-10-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://online-journal.unja.ac.id/JIITUJ/article/view/53779</dc:identifier>
	<dc:identifier>10.22437/jiituj.v10i5.53779</dc:identifier>
	<dc:source xml:lang="en">Jurnal Ilmiah Ilmu Terapan Universitas Jambi; Vol. 10 No. 5 (2026): Volume 10, Nomor 5, October 2026; 2708-2723</dc:source>
	<dc:source>2580-2259</dc:source>
	<dc:source>2580-2240</dc:source>
	<dc:source>10.22437/jiituj.v10i5</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://online-journal.unja.ac.id/JIITUJ/article/view/53779/25999</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Rafsanzani Pane, Sudirman Lubis, Basuki Wirjosentono, Taufiq Bin Nur</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>