Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Identified Of Indicator And Material For Product Shelf Life Recorder Smart Label

Indonesian Food Science and Technology Journal · Vol. 1 No. 1 (2018) · hlm. 43–53

DOI
10.22437/ifstj.v1i1.5016
ISSN
2615-367X
Terbit
2018-05-18
Penerbit
Department of Technology of Agricultural product (THP) Jambi University
Bahasa
en
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Shelf life is an important factor in determining the quality and safety of food for consumption. Refrigerator becomes an alternative in extending product shelf life. Shelf life is difficult to be identified if the product stored for too long. Smart label of Time Temperature Indicators (TTI) can record the product shelf life based on its storage time. In this research, identification of indicator and material for smart label development based on liquid diffusion in material was conducted. This study used several types of materials (Buffalo paper, HVS 80 gr, photo paper, concord, drawing paper and cardboard duplex), low viscosity indicators (board-marker ink, stamp, tubs, permanent tattoo and non-permanent tattoos) and high viscosity indicators (cooking oil, lubricant A and lubricant B). The initial phase was characterizations such as grammage, density, mass density and viscosity test aimed to determine the properties of indicators and materials. Identification was implemented by measuring the diffusion length of indicator in the material at 24, 48, 72 and 96 h in temperature of 30.15°C and 50°C for cooking oil, while 30.15°C and 5°C for oil A and B. The slope of diffusion length versus time is called by rate constant (k), where as the slope of ln k versus 1/T is called by activation energy (Ea). Best indicator and the material were selected based on their high value of Ea. Result showed that the ink was not be absorbed during storage due to its high volatility and low viscosity, while cooking oil, lubricant A and lubricant B have specific diffusion length during storage. These indicators and mediums were able to detect up to 4 days of shelf life during storage. Based on activation energy, the most suitable indicator for smart label was lubricant A. The best materials for this label development sequentially from low-to-high activation energy were Buffalo paper, duplex cartons, drawing paper, concord, HVS 80 g and photo paper.

Jaringan kolaborasi para penulis

15 penulis · 27 tautan kepenulisan bersama · 5 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • IPB University
  • Sumatera Institute of Technology
  • Bandung Institute of Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Aldyanza Yusuf Shyna IskandarAfiliasi tidak diketahui1
Ade IskandarIPB University1
Indah YuliasihIPB University1
Elfa Susanti ThamrinSumatera Institute of Technology1
Yazid BindarBandung Institute of Technology1
Ono SuparnoIPB University1
Machfud MachfudIPB University1
Hartrisari HardjomidjojoIPB University1
Hayu KartikaIPB University1
Fatimah HanimanAfiliasi tidak diketahui1
Siti SauliAfiliasi tidak diketahui1
Hendy Muagiri MargonoAfiliasi tidak diketahui1
Didi AryonoAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://online-journal.unja.ac.id/index.php/ifstj/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Identified Of Indicator And Material For Product Shelf Life Recorder Smart Label</dc:title>
	<dc:creator xml:lang="en">Warsiki, Endang</dc:creator>
	<dc:creator xml:lang="en">Octaviasari, Riris</dc:creator>
	<dc:description xml:lang="en">Shelf life is an important factor in determining the quality and safety of food for consumption. Refrigerator becomes an alternative in extending product shelf life. Shelf life is difficult to be identified if the product stored for too long. Smart label of Time Temperature Indicators (TTI) can record the product shelf life based on its storage time. In this research, identification of indicator and material for smart label development based on liquid diffusion in material was conducted. This study used several types of materials (Buffalo paper, HVS 80 gr, photo paper, concord, drawing paper and cardboard duplex), low viscosity indicators (board-marker ink, stamp, tubs, permanent tattoo and non-permanent tattoos) and high viscosity indicators (cooking oil, lubricant A and lubricant B). The initial phase was characterizations such as grammage, density, mass density and viscosity test aimed to determine the properties of indicators and materials. Identification was implemented by measuring the diffusion length of indicator in the material at 24, 48, 72 and 96 h in temperature of 30.15°C and 50°C for cooking oil, while 30.15°C and 5°C for oil A and B. The slope of diffusion length versus time is called by rate constant (k), where as the slope of ln k versus 1/T is called by activation energy (Ea). Best indicator and the material were selected based on their high value of Ea. Result showed that the ink was not be absorbed during storage due to its high volatility and low viscosity, while cooking oil, lubricant A and lubricant B have specific diffusion length during storage. These indicators and mediums were able to detect up to 4 days of shelf life during storage. Based on activation energy, the most suitable indicator for smart label was lubricant A. The best materials for this label development sequentially from low-to-high activation energy were Buffalo paper, duplex cartons, drawing paper, concord, HVS 80 g and photo paper.</dc:description>
	<dc:publisher xml:lang="en">Department of Technology of Agricultural product (THP) Jambi University</dc:publisher>
	<dc:date>2018-05-18</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://online-journal.unja.ac.id/ifstj/article/view/5016</dc:identifier>
	<dc:identifier>10.22437/ifstj.v1i1.5016</dc:identifier>
	<dc:source xml:lang="en">Indonesian Food Science and Technology Journal; Vol. 1 No. 1 (2017): Volume 1 Number 1, December 2017 |IFSTJ|; 43-53</dc:source>
	<dc:source>2615-367X</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://online-journal.unja.ac.id/ifstj/article/view/5016/8873</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2018 Indonesian Food Science and Technology Journal</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>