Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

The Effects of Moisture Content Variation on Some Engineering Properties of Almond Seed (Terminalia Catappa)

Indonesian Food Science and Technology Journal · Vol. 4 No. 2 (2021) · hlm. 45–50

DOI
10.22437/ifstj.v4i2.13673
ISSN
2615-367X
Terbit
2021-07-31
Penerbit
Department of Technology of Agricultural product (THP) Jambi University
Bahasa
en
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

The physical and mechanical properties of Almond seed at different moisture content levels of 6.78%, 12.39%, 17.11% and 21.97% were investigated in this study. The physical properties include geometric mean diameter, bulk density and angle of repose; they were determined using standard procedures. The length, width and thickness obtained for the 100 samples of the almond seeds were in the range of 25.42-28.63mm, 23.69-26.63mm, and 7.51-9.18mm respectively. The result shows a high uniformity on the seed sizes and significant variations between the length, width and thickness. The calculated values of the geometric mean diameter and sphericity ranged from 16.48-19.07mm and 64.66- 66.63% respectively. The results of the surface area varied from 853.6-1143.04mm2. The result also indicated a high variation in the surface area of the seeds with respect to the different moisture content levels. The mechanical properties which include rupture force, compressive strength and tensile strength were determined on the seeds. The mechanical properties show that the fracture force and compressive strength decreased from 2689N to 2499N, 410N/mm2 to 398 N/mm2respectivelywith an increase in moisture content (6.78%-21.9%). The tensile strength obtained for moisture levels of 6.78%, 12.39%, 16.11% and 21.9% were 3.20Mpa, 3.90Mpa, 4.20Mpa and 4.60Mpa respectively

Kata kunci

Jaringan kolaborasi para penulis

3 penulis · 3 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Federal University of Technology Minna
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://online-journal.unja.ac.id/index.php/ifstj/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">The Effects of Moisture Content Variation on Some Engineering Properties of Almond  Seed (Terminalia Catappa)</dc:title>
	<dc:creator xml:lang="en">Atteh, Bamidele</dc:creator>
	<dc:creator xml:lang="en">Olukemi, Oguntoyinbo</dc:creator>
	<dc:creator xml:lang="en">Bosede Adelola, Orhevba</dc:creator>
	<dc:subject xml:lang="en">physical properties</dc:subject>
	<dc:subject xml:lang="en"> mechanical properties</dc:subject>
	<dc:subject xml:lang="en"> moisture content</dc:subject>
	<dc:subject xml:lang="en">almond seed</dc:subject>
	<dc:description xml:lang="en">The physical and mechanical properties of Almond seed at different moisture content levels of 6.78%, 12.39%, 17.11% and 21.97% were investigated in this study. The physical properties include geometric mean diameter, bulk density and angle of repose; they were determined using standard procedures. The length, width and thickness obtained for the 100 samples of the almond seeds were in the range of 25.42-28.63mm, 23.69-26.63mm, and 7.51-9.18mm respectively. The result shows a high uniformity on the seed sizes and significant variations between the length, width and thickness. The calculated values of the geometric mean diameter and sphericity ranged from 16.48-19.07mm and 64.66- 66.63% respectively. The results of the surface area varied from 853.6-1143.04mm2. The result also indicated a high variation in the surface area of the seeds with respect to the different moisture content levels. The mechanical properties which include rupture force, compressive strength and tensile strength were determined on the seeds. The mechanical properties show that the fracture force and compressive strength decreased from 2689N to 2499N, 410N/mm2 to 398 N/mm2respectivelywith an increase in moisture content (6.78%-21.9%). The tensile strength obtained for moisture levels of 6.78%, 12.39%, 16.11% and 21.9% were 3.20Mpa, 3.90Mpa, 4.20Mpa and 4.60Mpa respectively</dc:description>
	<dc:publisher xml:lang="en">Department of Technology of Agricultural product (THP) Jambi University</dc:publisher>
	<dc:date>2021-07-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://online-journal.unja.ac.id/ifstj/article/view/13673</dc:identifier>
	<dc:identifier>10.22437/ifstj.v4i2.13673</dc:identifier>
	<dc:source xml:lang="en">Indonesian Food Science and Technology Journal; Vol. 4 No. 2 (2021): Volume 4 Nomor 2, July 2021 |IFSTJ|; 45-50</dc:source>
	<dc:source>2615-367X</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://online-journal.unja.ac.id/ifstj/article/view/13673/11658</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2021 Bamidele Atteh, Oguntoyinbo Olukemi, Orhevba Bosede Adelola</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>