Melola Discovery

← Melola Discovery

Akses terbuka Jurnal

Optimization of Spray Drying Process Parameter Condition for Theaflavin Extract from Black Tea (Camellia sinensis) Using Response Surface Methodology (RSM)

Indonesian Food Science and Technology Journal · Vol. 8 No. 1 (2024) · hlm. 138–148

DOI
10.22437/ifstj.v8i1.33645
ISSN
2615-367X
Terbit
2024-12-31
Penerbit
Department of Technology of Agricultural product (THP) Jambi University
Bahasa
en
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Black tea theaflavins contain high antioxidants that can be protective agents against SARS-CoV-2. The relatively good process conditions in spray drying are predicted to be able to protect and maintain the storage stability of theaflavin bioactive compounds by encapsulation. Therefore, this study aims to obtain optimum process conditions in spray drying black tea theaflavin extract. The analyzed data were interpreted using response surface methodology (RSM) with the independent variables used including spray drying inlet air temperature (100 oC, 120 oC, 140 oC) and extract to maltodextrin ratio (1:0.40; 1:0.80; 1:1.20 (v/v)). The resulting black tea powder was analyzed for theaflavin content by UV-Vis spectrophotometer (380 nm), moisture content by moisture analyzer, particle size by scanning electron microscopy (SEM), and yield. The optimum condition was reached at an inlet air temperature of 116oC and a ratio of black tea extract to maltodextrin 1:0.6627 (v/v) which resulted in R-square for yield, moisture content, and theaflavin content of 0.8946; 0.8016; 0.9324 respectively. The best theaflavin storage stability results were achieved in the seventh experiment with operating conditions of inlet air temperature 120oC and extract to maltodextrin ratio 1:0.23431 (v/v), obtained theaflavin content ranged from 0.37125% - 0.52650% from day 0 to day 30.

Kata kunci

Jaringan kolaborasi para penulis

13 penulis · 35 tautan kepenulisan bersama · 3 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Diponegoro University
  • Andalas University
  • Universitas Negeri Padang
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
S SutrisnoDiponegoro University1
Didik AriwibowoDiponegoro University1
Vita ParamitaDiponegoro University1
Febiani Dwi UtariDiponegoro University1
Belinda AzharaDiponegoro University1
Abitha MonawisyaDiponegoro University1
Muhammad Ardifa RizkiDiponegoro University1
Andri Cahyo KumoroDiponegoro University1
Refdinal NazirAndalas University1
Krismadinata KrismadinataUniversitas Negeri Padang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://online-journal.unja.ac.id/index.php/ifstj/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Optimization of Spray Drying Process Parameter Condition for Theaflavin Extract from Black Tea (Camellia sinensis) Using Response Surface Methodology (RSM)</dc:title>
	<dc:creator xml:lang="en">Amalia, Rizka</dc:creator>
	<dc:creator xml:lang="en">Endy Yulianto, Mohamad</dc:creator>
	<dc:creator xml:lang="en">Agustina, Arum</dc:creator>
	<dc:subject xml:lang="en">theaflavin</dc:subject>
	<dc:subject xml:lang="en">black tea</dc:subject>
	<dc:subject xml:lang="en">spray drying</dc:subject>
	<dc:subject xml:lang="en">optimization</dc:subject>
	<dc:subject xml:lang="en">RSM</dc:subject>
	<dc:description xml:lang="en">Black tea theaflavins contain high antioxidants that can be protective agents against SARS-CoV-2. The relatively good process conditions in spray drying are predicted to be able to protect and maintain the storage stability of theaflavin bioactive compounds by encapsulation. Therefore, this study aims to obtain optimum process conditions in spray drying black tea theaflavin extract. The analyzed data were interpreted using response surface methodology (RSM) with the independent variables used including spray drying inlet air temperature (100 oC, 120 oC, 140 oC) and extract to maltodextrin ratio (1:0.40; 1:0.80; 1:1.20 (v/v)). The resulting black tea powder was analyzed for theaflavin content by UV-Vis spectrophotometer (380 nm), moisture content by moisture analyzer, particle size by scanning electron microscopy (SEM), and yield. The optimum condition was reached at an inlet air temperature of 116oC and a ratio of black tea extract to maltodextrin 1:0.6627 (v/v) which resulted in R-square for yield, moisture content, and theaflavin content of 0.8946; 0.8016; 0.9324 respectively. The best theaflavin storage stability results were achieved in the seventh experiment with operating conditions of inlet air temperature 120oC and extract to maltodextrin ratio 1:0.23431 (v/v), obtained theaflavin content ranged from 0.37125% - 0.52650% from day 0 to day 30.</dc:description>
	<dc:publisher xml:lang="en">Department of Technology of Agricultural product (THP) Jambi University</dc:publisher>
	<dc:date>2024-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://online-journal.unja.ac.id/ifstj/article/view/33645</dc:identifier>
	<dc:identifier>10.22437/ifstj.v8i1.33645</dc:identifier>
	<dc:source xml:lang="en">Indonesian Food Science and Technology Journal; Vol. 8 No. 1 (2024): Volume 8 Number 1, December 2024 |IFSTJ| ; 138-148</dc:source>
	<dc:source>2615-367X</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://online-journal.unja.ac.id/ifstj/article/view/33645/19806</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2024 Indonesian Food Science and Technology Journal</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>