Melola Discovery

← Melola Discovery

Journal SINTA 1

The new modification of a solar still chamber with hollow glass: An experimental comparison between perpendicular and inline hollow glass configurations: Referred to by: https://doi.org/10.31603/mesi.17044

Mechanical Engineering for Society and Industry · Vol. 5 No. 2 (2025) · pp. 331–341

DOI
10.31603/mesi.13238
ISSN
2798-5245
Published
2025-12-28
Publisher
Universitas Muhammadiyah Magelang
Language
en

Abstract

Researchers around the world are conducting comprehensive studies on conventional single-slope solar stills (CS4). Recent trends have focused on minimizing heat loss and improving the productivity of these systems, particularly through modifications to the CS4 chamber. This present study examines the modified chambers of solar stills utilizing Perpendicular Hollow Glass Solar Still (PHGSS) and Inline Hollow Glass Solar Still (IHGSS). It provides a comprehensive analysis of the enhancements, highlighting key aspects such as productivity, energy balance, and efficiency, as well as introducing a potential new condensation site. To ensure accuracy and reliability, the results are validated using the coefficient he/hc from a previous study, which reported a margin of error of 7.76%. The application of hollow glass has proven its ability to produce distillate condensation due to the temperature gradient present between the inner surface of the hollow glass and the cavity it encloses. Moreover, the production and efficiency of both inline and perpendicular hollow glass highly exceeds those of conventional CS4.

Keywords

Collaboration network of the authors

40 authors · 105 co-authorship links · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • State University of Semarang
  • Universitas KH. A. Wahab Hasbullah
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Didik SubiyantoAffiliation unknown3
Henny WelsaAffiliation unknown2
Essam R. I. MahmoudAffiliation unknown2
Putut MarwotoState University of Semarang1
Ngurah Made D. PAffiliation unknown1
Deny SetiawanAffiliation unknown1
Ibrahim BafadalAffiliation unknown1
Achmad SupriyantoAffiliation unknown1
Tri Ratna PurnamariniAffiliation unknown1
Fahmy Purnamandiri KurniawanAffiliation unknown1
Edi NurgiyantoroAffiliation unknown1
Nurtrisnawati Mar'unAffiliation unknown1
Hendrajati HendrajatiAffiliation unknown1
Epsilandri SeptyariniAffiliation unknown1
Arneliana ArnelianaAffiliation unknown1
Riska Sri Pertiwi HoAffiliation unknown1
Eko YuliantoAffiliation unknown1
Tito Aji MilleniawanAffiliation unknown1
Ignatius Soni KurniawanAffiliation unknown1
Nur Saifullah ShiddiqAffiliation unknown1
Mohammad Ahyar Syafwan LysanderAffiliation unknown1
Shahnur Al-HafriAffiliation unknown1
Tri PurnomoAffiliation unknown1
Mohammad RondhiAffiliation unknown1
Rokhani RokhaniAffiliation unknown1
Anik SuwandariAffiliation unknown1
Ebban Bagus KuntadiAffiliation unknown1
Muhamad ImanuddinAffiliation unknown1
Yasuhiro MoriAffiliation unknown1
Takumi KondoAffiliation unknown1
Shohibul UlumAffiliation unknown1
Nita Anisya FirdausAffiliation unknown1
Nanang QosimUniversitas KH. A. Wahab Hasbullah1
Zakki Fuadi EmzainAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.unimma.ac.id/index.php/mesi/oai, first harvested 9 Nov 2026, last seen 9 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">The new modification of a solar still chamber with hollow glass: An experimental comparison between perpendicular and inline hollow glass configurations: Referred to by: https://doi.org/10.31603/mesi.17044</dc:title>
	<dc:creator xml:lang="en">Budiana, Eko Prasetya</dc:creator>
	<dc:creator xml:lang="en">Septiyanto, Muhamad Dwi</dc:creator>
	<dc:creator xml:lang="en">Auliansyah, Satria</dc:creator>
	<dc:creator xml:lang="en">Sayyid, Naufal Rizky</dc:creator>
	<dc:creator xml:lang="en">Yaningsih, Indri</dc:creator>
	<dc:creator xml:lang="en">Hadi, Syamsul</dc:creator>
	<dc:subject xml:lang="en">PHGSS</dc:subject>
	<dc:subject xml:lang="en">IHGSS</dc:subject>
	<dc:subject xml:lang="en">Hollow Glass</dc:subject>
	<dc:subject xml:lang="en">CS4 modification</dc:subject>
	<dc:subject xml:lang="en">Desalination</dc:subject>
	<dc:description xml:lang="en">Researchers around the world are conducting comprehensive studies on conventional single-slope solar stills (CS4). Recent trends have focused on minimizing heat loss and improving the productivity of these systems, particularly through modifications to the CS4 chamber. This present study examines the modified chambers of solar stills utilizing Perpendicular Hollow Glass Solar Still (PHGSS) and Inline Hollow Glass Solar Still (IHGSS). It provides a comprehensive analysis of the enhancements, highlighting key aspects such as productivity, energy balance, and efficiency, as well as introducing a potential new condensation site. To ensure accuracy and reliability, the results are validated using the coefficient he/hc from a previous study, which reported a margin of error of 7.76%. The application of hollow glass has proven its ability to produce distillate condensation due to the temperature gradient present between the inner surface of the hollow glass and the cavity it encloses. Moreover, the production and efficiency of both inline and perpendicular hollow glass highly exceeds those of conventional CS4.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2025-12-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/mesi/article/view/13238</dc:identifier>
	<dc:identifier>10.31603/mesi.13238</dc:identifier>
	<dc:source xml:lang="en">Mechanical Engineering for Society and Industry; Vol. 5 No. 2 (2025); 331-341</dc:source>
	<dc:source>2798-5245</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/mesi/article/view/13238/6393</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Eko Prasetya Budiana, Muhamad Dwi Septiyanto, Satria Auliansyah, Naufal Rizky Sayyid, Indri Yaningsih, Syamsul Hadi</dc:rights>
</oai_dc:dc>