Melola Discovery

← Melola Discovery

Open access Journal SINTA 1

Conducted emission investigation of infant incubator heating control mode

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 12 No. 6 (2022)

DOI
10.11591/ijece.v12i6.pp5900-5910
ISSN
2722-2578, 2088-8708
Published
2022-12-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

This paper investigates the effect of two different heating power control systems of infant incubators on their conducted emissions. Two infant incubators which respectively employ zero-crossing control mode and phase angle control mode are observed. The research was conducted by measuring conducted electromagnetic interference (EMI) from each infant incubator's power input. Measurements are conducted both during full power condition, while the incubator's compartment temperature is far away from the temperature setpoint, and during power chopping condition, while the compartment temperature reaches the steady-state set point. Method and limit of the measurement refer to CISPR 11. It is found that conducted emission higher than the standard CISPR 11 limit occurs during power chopping on phase angle control mode. This results from the sharp rise time of voltage delivered to the heater, around 220 ns for each chopping cycle.

Collaboration network of the authors

40 authors · 111 co-authorship links · 12 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • National Research and Innovation Agency
  • Universitas Halu Oleo
  • University of Twente
  • Jenderal Soedirman University
  • State University of Semarang
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Yudhistira YudhistiraNational Research and Innovation Agency6
Hutomo Wahyu NugrohoNational Research and Innovation Agency6
Dwi MandarisNational Research and Innovation Agency6
Aditia Nur BaktiNational Research and Innovation Agency3
Rahadina Praba MelatiAffiliation unknown2
Indri YatiAffiliation unknown2
Muhammad Eka PrastyaAffiliation unknown2
Erma SuryantiAffiliation unknown2
Gian PrimahanaAffiliation unknown2
Indrati KusumaningrumAffiliation unknown2
Rahmania Nur AfiahAffiliation unknown2
Irawan SukmaNational Research and Innovation Agency2
Wuwus ArdiatnaNational Research and Innovation Agency2
Novitasari NovitasariNational Research and Innovation Agency2
Siddiq Wahyu HidayatNational Research and Innovation Agency2
Asep Rahmat HidayatNational Research and Innovation Agency2
Ihsan SuponoNational Research and Innovation Agency2
Darjati DarjatiAffiliation unknown1
Rachmaniyah RachmaniyahAffiliation unknown1
Sahta GintingUniversitas Halu Oleo1
Namriah NamriahUniversitas Halu Oleo1
Darwis DarwisUniversitas Halu Oleo1
Fransiscus Suramas RembonUniversitas Halu Oleo1
Syamsu AlamUniversitas Halu Oleo1
Ratna Stia DewiJenderal Soedirman University1
Endang SusilaningsihState University of Semarang1
Sri NurhayatiAffiliation unknown1
Deky Aji SusenoAffiliation unknown1
Yozi Aulia RahmanAffiliation unknown1
Fafurida FafuridaAffiliation unknown1
Sri UtamiAffiliation unknown1
Ika FebrianiAffiliation unknown1
Noorochmat IsdaryantoAffiliation unknown1
Eva Nur HidayahAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Oct 2026, last seen 8 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Conducted emission investigation of infant incubator heating control mode</dc:title><dc:creator>Khotimah, Khusnul</dc:creator><dc:creator>Yoppy, Yoppy</dc:creator><dc:creator>Sudrajat, Muhammad Imam</dc:creator><dc:creator>Permatasari, Vera</dc:creator><dc:creator>Trivida, Elvina</dc:creator><dc:creator>Wijarnoko, Tyas Ari Wahyu</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;span lang="EN-US"&amp;gt;This paper investigates the effect of two different heating power control systems of infant incubators on their conducted emissions. Two infant incubators which respectively employ zero-crossing control mode and phase angle control mode are observed. The research was conducted by measuring conducted electromagnetic interference (EMI) from each infant incubator's power input. Measurements are conducted both during full power condition, while the incubator's compartment temperature is far away from the temperature setpoint, and during power chopping condition, while the compartment temperature reaches the steady-state set point. Method and limit of the measurement refer to CISPR 11. It is found that conducted emission higher than the standard CISPR 11 limit occurs during power chopping on phase angle control mode. This results from the sharp rise time of voltage delivered to the heater, around 220 ns for each chopping cycle.&amp;lt;/span&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2022-12-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v12i6.pp5900-5910</dc:identifier><dc:identifier>10.11591/ijece.v12i6.pp5900-5910</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 12 No 6 (2022); 5900</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>https://ijece.iaescore.com/index.php/IJECE/article/viewFile/26240/16034</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>