Melola Discovery

← Melola Discovery

Jurnal

Analysis of the Effect of Modification of the Semi-Mechanical Pericarp on The Quality of Nutmeg Seeds

Tekper : Jurnal Teknologi dan Manajemen Industri Pertanian · Vol. 2 No. 1 (2021) · pp. 36–42

DOI
10.33772/tekper.v2i1.17225
ISSN
2721-5709
Published
2021-09-08
Publisher
Jurusan Ilmu dan Teknologi Pangan, Fakultas Pertanian,
Language
eng

Abstract

The purpose of this study was to determine the effect of the modified semi-mechanical nutmeg pulp breaker (pericarp) on the presentation of damage to the yield of split nutmeg seeds. This research was conducted in two stages, namely the stage of making the tool and testing the device. The testing stages are as follows: In the framework, there is a place to put the nutmeg to be split, the space is shaped like a rectangular box, inside the box, space can be filled with three nutmegs. So, every time the nutmeg is split process, there is three split nutmeg. The stages observed in this study are the percentage of yield damage, the nutmeg splitter's input capacity, the nutmeg splitter's adequate capacity, yield, and uniformity of cleavage data. The testing results of this tool resulted in a reasonable degree of 512 ±162,774 pieces/hour, yield damage of 9.9 ±15.940%, and yield of 90.1 ±15.940%. This tool is more efficient because it is easier to use and does not use motor power. The working capacity of this semi-mechanical splitter is doubled when compared to manual splitters

Keywords

Collaboration network of the authors

40 authors · 129 co-authorship links · 1 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Tamrin TamrinUniversitas Halu Oleo15
La RiandaAffiliation unknown11
Ansharullah AnsharullahUniversitas Halu Oleo9
LA KARIMUNAUniversitas Halu Oleo7
Sarinah SarinahAffiliation unknown6
SRI WAHYUNIAffiliation unknown6
SRI REJEKIUniversitas Halu Oleo4
Muhammad Zakir MuzakkarAffiliation unknown4
Muhammad Syukri SadimantaraUniversitas Halu Oleo4
Abdu Rahman BacoAffiliation unknown4
Suwarjoyowirayatno SuwarjoyowirayatnoAffiliation unknown4
Muhammad SyukriUniversitas Syiah Kuala3
Kobajashi Togo IsamuAffiliation unknown3
RH Fitri FaradillaAffiliation unknown3
Djukrana WahabAffiliation unknown2
Sitti HAJJAH AwaliyahAffiliation unknown2
Nur AsyikUniversitas Halu Oleo2
Bayu HarisaktiAffiliation unknown2
Wa Ode RatnaUniversitas Halu Oleo1
GEDE AGUS SANJAYAUniversitas Halu Oleo1
Nurhaliza NurhalizaUniversitas Halu Oleo1
MARIANI MARIANIUniversitas Halu Oleo1
ADAM MALIKUniversitas Halu Oleo1
H. Abdu Rahman BacoAffiliation unknown1
Erni PurnawatiAffiliation unknown1
Alma GebrianiAffiliation unknown1
Hamrin HamrinAffiliation unknown1
Ade Sidratul HayatAffiliation unknown1
Erni WatiAffiliation unknown1
Ismail IsmailAffiliation unknown1
Sutantri SutantriAffiliation unknown1
Muhammad TisaktiAffiliation unknown1
Kadir KadirAffiliation unknown1
Lestina LestinaAffiliation unknown1
Yekim MuhammadAffiliation unknown1
Sukmawati AbdullahAffiliation unknown1
Desty RismayantiAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/JMIP/oai, first harvested 30 Okt 2026, last seen 1 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Analysis of the Effect of Modification of the Semi-Mechanical Pericarp on  The Quality of Nutmeg Seeds</dc:title>
	<dc:creator>Arsandi, Mizan Reski</dc:creator>
	<dc:creator>Hermanto, Hermanto</dc:creator>
	<dc:creator>Sakir, Sakir</dc:creator>
	<dc:subject xml:lang="en-US">Nutmeg seed; tool modification; nutmeg seed quality</dc:subject>
	<dc:description xml:lang="en-US">The purpose of this study was to determine the effect of the modified semi-mechanical nutmeg pulp breaker (pericarp) on the presentation of damage to the yield of split nutmeg seeds. This research was conducted in two stages, namely the stage of making the tool and testing the device. The testing stages are as follows: In the framework, there is a place to put the nutmeg to be split, the space is shaped like a rectangular box, inside the box, space can be filled with three nutmegs. So, every time the nutmeg is split process, there is three split nutmeg. The stages observed in this study are the percentage of yield damage, the nutmeg splitter's input capacity, the nutmeg splitter's adequate capacity, yield, and uniformity of cleavage data. The testing results of this tool resulted in a reasonable degree of 512 ±162,774 pieces/hour, yield damage of 9.9 ±15.940%, and yield of 90.1 ±15.940%. This tool is more efficient because it is easier to use and does not use motor power. The working capacity of this semi-mechanical splitter is doubled when compared to manual splitters</dc:description>
	<dc:publisher xml:lang="en-US">Jurusan Ilmu dan Teknologi Pangan, Fakultas Pertanian,</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2021-09-08</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/JMIP/article/view/17225</dc:identifier>
	<dc:identifier>10.33772/tekper.v2i1.17225</dc:identifier>
	<dc:source xml:lang="en-US">Tekper : Jurnal Teknologi dan Manajemen Industri Pertanian; Vol 2, No 1 (2021): April  - Tekper : Jurnal Teknologi dan Manajemen Industri Pertanian; 36 - 42</dc:source>
	<dc:source>2721-5709</dc:source>
	<dc:source>10.33772/tekper.v2i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/JMIP/article/view/17225/pdf</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Tekper : Jurnal Teknologi dan Manajemen Industri Pertanian</dc:rights>
</oai_dc:dc>